Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the AdBlue warning light on the Audi A4?

Model: Audi A4 B8 - Years 2007-2016
Part: AdBlue warning light

In order to reset the AdBlue warning light on the Audi A4, you need to open the fuel filler flap, located on the rear right side of the vehicle: here you will find the cap for refueling with fuel and next to it a smaller cap for refueling with AdBlue. You will then need to unscrew this cap to be able to insert the necessary amount of liquid into the tank; once this amount has been inserted, you can close the tank, and you will see that the AdBlue warning light has disappeared from the dashboard.

Posted on 5 April 2024 by ScegliAuto

Video tutorial

Related tutorials

Resetting the AdBlue warning light on the Audi A4.
Resetting the AdBlue warning light on the Audi A4.
Audi A4 (2014-2024 / B9) The instructions given in this guide will show us how to reset the AdBlue refill warning light on the Audi A4. First, it is necessary to have perform…
Reset of the AdBlue warning light of the Audi A4
Reset of the AdBlue warning light of the Audi A4
Audi A4 (2007-2016 / B8) In this guide, we will see the instructions that will allow us to reset the AdBlue warning light on the Audi A4. First, we get inside the vehicle and…
How do you reset the AdBlue warning light on the Audi A4?
How do you reset the AdBlue warning light on the Audi A4?
Audi A4 (2014-2024 / B9) When the AdBlue warning light appears on the instrument panel of the Audi A4, it means that a generic problem has occurred in the emissions reduction…

Other guides you may be interested in

    Frequently Asked Questions

    • A4 2014-2024 - Why doesn't the AdBlue warning light on the Audi A4 reset? Read answer
    • A4 2014-2024 - What causes the error in the AdBlue system in Audi? Read answer
    • A4 2014-2024 - What to do if the AdBlue anomaly comes out in the Audi A4? Read answer

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos