Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to paint the hubcap of the Audi A3.

Model: Audi A3 8V, MK 3 - Years 2012-2019

Painting the hubcap of the Audi A3 is a very simple operation to perform independently. The first thing to do is to remove the hubcap from the car, to do this you simply need to pry in the area and remove it. Once removed, you can think about removing the previous paint before applying the new paint and fixative. To remove the paint, you will need to use sandpaper and clean the area. Once the area is "clean", you can paint the hubcap. Let it dry for a day and then reassemble the piece. To perform this operation on other cars, the steps to be followed are the same.

Posted on 7 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change a Wheel on an Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Let’s see how to change a wheel on an Audi A3: open the boot and take the wheel removal kit which includes: jack, jack handle, screwdriver, wheel nut…
How to Replace the Wheel Bearing
How to Replace the Wheel Bearing
Audi A3 (2003-2013 / MK 2, 8P) This operation should be performed by lifting the car and ensuring safety, as considerable force is required to remove the hub. You may notice the ne…
How to Remove the Front Brake Disc Bearing on an Audi A3
How to Remove the Front Brake Disc Bearing on an Audi A3
Audi A3 (2003-2013 / MK 2, 8P) How to remove the front brake disc bearing on an Audi A3? First, position your car on a column lift (jack), loosen the bolts with a telescopic spanne…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos