Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the armrest of the Audi A6

Model: Audi A6 MK 2, C5 - Years 1997-2004

The following steps will show us how to disassemble and replace the armrest of the Audi A6, following the instructions provided below. First, we get into the car and start by removing the plastic back cover of the armrest; then we unscrew the screws found inside, as shown in the video. At this point, we gently lift and detach the armrest, repairing or replacing it if necessary with a new one; then we reassemble the armrest and check the sliding operation, finally reattaching the back cover of the armrest.

Posted on 14 July 2024 by ScegliAuto

Video tutorial

Related tutorials

Audi A6 (2004-2012 / MK 3, C6) In this tutorial, you will learn how to remove and replace the armrest without taking off the lower support and the small storage compartment, on an …
Audi A6 (2004-2012 / MK 3, C6) This guide outlines the main steps to remove and replace the center armrest of the Audi A6, following the instructions below. First, get in the vehic…
Audi A6 (2011-2018 / C7, MK 4) Today we will discover the instructions that will allow us to disassemble and remove the central tunnel of the Audi A6, in simple steps. First of all…

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos