Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the center console of the Audi A4

Model: Audi A4 B8 - Years 2007-2016

Removing the central console of an Audi A4 model 8b vehicle is a fairly simple and quick operation to perform independently. To carry out this operation, we will need to climb inside the vehicle and sit on the driver's side. Immediately after, we gradually insert a plastic lever to remove the cover in its entirety. Disconnect the connectors of the buttons and remove the plastic cover. At this point, if necessary, we can also proceed to disassemble the gearshift boot and knob. The assembly requires the use of the following steps, but in reverse, you will simply need to insert the cover to complete the job.

Posted on 8 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the central console of the Audi A4
Audi A4 (2014-2024 / B9) Today we will see the process of disassembly and replacement of the console or central tunnel of the Audi A4. First, we get on board the vehicle and …
How to disassemble the console and central tunnel of the Audi A4
How to disassemble the console and central tunnel of the Audi A4
Audi A4 (2007-2016 / B8) In this guide, we will see the instructions that will allow us to disassemble and remove the console and the central tunnel of the Audi A4. First of …
Removing the Car Radio from an Audi A4
Removing the Car Radio from an Audi A4
Audi A4 (2004-2008 / B7) Today, you will see a very simple tutorial: removing the car radio from the center console of an Audi A4. The first step to remove the car radio from…

    Frequently Asked Questions

    • A4 2004-2008 - How much does it cost to change ownership of an Audi A4 1.9 TDI? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos