Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. : Leoncino 250

Benelli Leoncino 250 - Video guides

Benelli Leoncino 250
How to Replace the Battery of the Benelli Leoncino 250?
To replace the battery of the Benelli Leoncino 250, you need to completely detach the seat from its mounting: once removed, you can loosen the screws that …Read all…
Posted on 17 May 2026 by ScegliAuto
Benelli Leoncino 250
How do you replace the exhaust pipe of the Benelli Leoncino 250?
In order to replace the exhaust pipe of the Benelli Leoncino 250, you need to loosen the screws that hold it in place, near the rear wheel: here you will be …Read all…
Posted on 21 May 2025 by ScegliAuto
Benelli Leoncino 250
How do you replace the battery of the Benelli Leoncino 250?
To replace the battery of the Benelli Leoncino 250, you will need to loosen the screws that secure the motorcycle seat to its housing, so that it can be …Read all…
Posted on 23 July 2024 by ScegliAuto
Benelli Leoncino 250
How to replace the exhaust on a Benelli Leoncino 250?
To replace the exhaust on a Benelli Leoncino 250, loosen the bolts that secure the exhaust to the supports located on the right side of the bike, near the rear …Read all…
Posted on 19 September 2026 by ScegliAuto
Benelli Leoncino 250
How to Change the Engine Oil of the Benelli Leoncino 250?
To change the engine oil of the Benelli Leoncino 250, loosen the drain plug located at the central lower part of the bike: once this plug is removed, allow all …Read all…
Posted on 22 September 2026 by ScegliAuto

See also:

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos