|
Do it yourself
| |||
| ||||
|
Model: Benelli Leoncino 250
To change the engine oil of the Benelli Leoncino 250, loosen the drain plug located at the central lower part of the bike: once this plug is removed, allow all the used oil to flow into a suitably positioned container. Next to the drain plug, you will find the oil filter, which must be removed from its housing and replaced with a new one. After the replacement, top up by pouring oil from the upper part of the crankcase on the left side of the bike.
Updated on 5 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Leoncino 250
To replace the battery of the Benelli Leoncino 250, you need to completely detach the seat from its mounting: once removed, you can loosen the screws…
Leoncino 250
In order to replace the exhaust pipe of the Benelli Leoncino 250, you need to loosen the screws that hold it in place, near the rear wheel: here you …
Leoncino 250
To replace the exhaust on a Benelli Leoncino 250, loosen the bolts that secure the exhaust to the supports located on the right side of the bike, nea…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.091
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |