Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the engine oil in the Benelli TRK 251, an extremely simple and quick operation. First of all, make sure that the engine is cold enough, then place a container underneath it, locate the drain hole bolt and unscrew it using a 17mm socket wrench. Let all the oil in the system drain out, open the filter cap and insert the replacement. At this point, all that's left to do is tighten the bolt and pour the necessary amount of oil through the designated upper hole.

Posted on 30 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in a Benelli TRK 251?
How to Change the Engine Oil in a Benelli TRK 251?
Trk 251 In this tutorial, you will learn how to change the engine oil in a Benelli TRK 251, a very simple and quick operation. First, ensure that the engine …
How to Change the Engine Oil of the Benelli TRK 251?
How to Change the Engine Oil of the Benelli TRK 251?
Trk 251 To change the engine oil of the Benelli TRK 251, loosen the drain plug located at the central lower part of the bike. Once this plug is loosened, you…
How to Change the Engine Oil in the Benelli TRK 251
How to Change the Engine Oil in the Benelli TRK 251
Trk 251 In this tutorial, see how to change the engine oil in the Benelli TRK 251, a very simple and quick operation. First, ensure that the engine is suffic…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos