Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform Routine Maintenance on the Benelli TRK 502

Model: Benelli Trk 502
Part: Engine oil

Video tutorial

In a few simple steps, learn how to perform routine maintenance by replacing the engine oil and oil filter of the Benelli TRK 502. First, place the motorcycle on the centre stand and start unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge and replace it with a new one (screw it in and tighten gently by hand).

Now unscrew the filler cap and pour in the new engine oil until it reaches the maximum level mark!


Updated on 26 October 2026 by ScegliAuto


Related tutorials

How to Perform an Oil Change on a Benelli TRK 502
How to Perform an Oil Change on a Benelli TRK 502
Trk 502 Let’s go through the procedure for performing routine maintenance by changing the engine oil and oil filter on a Benelli TRK 502. First, place the mo…
How to Change Engine Oil and Oil Filter on Benelli TRK 502
How to Change Engine Oil and Oil Filter on Benelli TRK 502
Trk 502 In this guide, learn how to change the engine oil and oil filter as part of regular maintenance on a Benelli TRK 502. First, position the motorcycle …
How to Perform a Service on the Benelli TRK 502
How to Perform a Service on the Benelli TRK 502
Trk 502 In today's video, we will see how to perform a complete service on the Benelli TRK 502. First, purchase the necessary components for the operation, n…

How to Replace the Headlight Bulbs on the Triumph Speed Triple 765 R?

In this tutorial, you will see how to replace the headlight bulbs on the Triumph Speed Triple 765 R, a very simple and quick operation. First, ensure that the key is not inserted, then locate the large cap at the back of the headlight and remove it by turning it counterclockwise. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing. At this point, simply insert the replacement and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos