Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial we can see how to replace the motor oil in the Benelli TRK 502 X, an extremely simple and fast operation. First of all, make sure that the engine is cold enough, then position a container underneath it and remove the lower protection cover. Next, locate the drainage hole bolt, unscrew it using a 19mm socket wrench and let all the oil contained in the system drain out. At this point, we can unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.

Posted on 27 April 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Oil and Oil Filter on the Benelli Trk 502
How to Replace the Engine Oil and Oil Filter on the Benelli Trk 502
Trk 502 Today, learn how to replace the engine oil and oil filter on the Benelli Trk 502 motorcycle as part of routine maintenance. First, place the motorcyc…
How to Change Engine Oil and Oil Filter on Benelli TRK 502
How to Change Engine Oil and Oil Filter on Benelli TRK 502
Trk 502 In this guide, learn how to change the engine oil and oil filter as part of regular maintenance on a Benelli TRK 502. First, position the motorcycle …
How to change the engine oil on the Benelli TRK 502?
Trk 502 To change the engine oil on the Benelli TRK 502, loosen the drain plug located at the bottom centre of the bike: once this plug is removed, collect t…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos