Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
It will be possible to replace the exhaust of the Benelli TnT 1130 by loosening the screws that fix the exhaust terminal to its housing, next to the rear wheel on the right side of the vehicle: once the fixing screws of the piece have been loosened, it will be possible to proceed by widening the connecting clamp that joins the exhaust to the collector. At this point, it will be possible to proceed by inserting the new replacement piece: this can now be fixed with the appropriate screws and connected to the exhaust to verify that everything works.

Posted on 11 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Replace the Starter Solenoid on the Benelli TNT 1130
Replace the Starter Solenoid on the Benelli TNT 1130
Tnt 1130 In today's tutorial, you will learn how to remove and replace the starter solenoid on the Benelli TNT 1130 motorcycle, following the instructions bel…
How to Replace the Engine Oil and Oil Filter of the Benelli TNT 1130
How to Replace the Engine Oil and Oil Filter of the Benelli TNT 1130
Tnt 1130 In this video, discover the steps to perform routine maintenance by replacing the engine oil and oil filter on the Benelli TNT 1130 motorcycle. First…
How to Remove the Fuel Tank on the Benelli TNT 1130
How to Remove the Fuel Tank on the Benelli TNT 1130
Tnt 1130 In this video tutorial, you will see how to remove the fuel tank on the second-generation Benelli TNT 1130 by following these simple steps. First, un…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos