Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Bn 302
    4. : How to replace the mirror of a Benelli Bn 302 motorcycle

Model: Benelli Bn 302
Part:
How to replace the mirror of a Benelli Bn 302 motorcycle

How to replace the mirror of a Benelli Bn 302 motorcycle? We unscrew the locking pin with a suitable fixed key. Once the locking pin has been loosened, unscrew it with one hand, keep the handlebar still with the other (as in the video). During reassembly we screw the mirror into the thread with the pin placed above the handlebar; we hold the mirror with one hand and with the other we screw the nut with the wrench. Finally, we test the correct functioning of the mirror, we adjust the view by getting on the bike for convenience. We mount the right mirror in the exact same way as the left mirror.


Posted on 10 November 2023 by ScegliAuto



How to do the service (oil change) on the Benelli BN 302
Bn 302 Let's find out in this guide the procedure on how to carry out the maintenance service of the oil change of the Benelli BN 302 motorcycle. engine, us
How to perform maintenance on the Benelli BN 302?
Bn 302 Let's briefly learn how to perform the routine maintenance of the Benelli BN 302 motorcycle, replacing the engine oil and oil filter. First, let's pu
How do you replace the brake pads on the Benelli BN 302?
Bn 302 In order to replace the brake pads on the Benelli BN 302, the same operation must be performed both for the front and rear ones. It will be necessary

How to bleed the brake system of the Kymco GP125

The guide shows how to bleed the Kymco GP125 brake oil system. After securing the vehicle and protecting the upper fairing with rags, unscrew the two fixing screws of the brake fluid reservoir cap and remove the covers. Using an 8mm wrench, loosen the bleed valve on the front caliper and install the drain hose. Activate the brake to let the fluid flow out of the system. Remove the brake caliper, push the piston all the way and clean it with a special spray. Reassemble everything in place and, if necessary, top up the fluid. Check the correct functioning of the brakes before taking the road.

Watch the video!


by ScegliAuto

More videos