Do it yourself
Frequently asked questions about cars and motorcycles
To replace the spark plugs on a Benelli BN 302, you need to loosen the bolts that secure the side panels at the front of the bike, near the fuel tank. Once these panels are removed, you can unscrew the bolts that hold the fuel tank in place, allowing it to be lifted for access to the components underneath. After removing the box that secures the air filter, you can pull out the underlying spark plugs, which will be replaced with new spare parts. After the replacement, reassemble all the parts that were previously removed.

Updated on 21 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Bn 302 To replace the exhaust on a Benelli BN 302, loosen the bolts securing the side panels at the lower side of the bike to access the mounting ring betwe…
Bn 302 Today, remove the Torx screws located under the instrument panel to detach the headlamp. Next, unscrew the screws from the bulb cover to access the b…
Bn 302 To replace the brake pads on a Benelli BN 302, perform the same operation for both the front and rear pads. You will need to unscrew the bolts that s…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos