|
Do it yourself
| |||
| ||||
Model: Benelli Bn 302
To replace the number plate holder on the Benelli BN 302, loosen the bolts that secure it to its housing. These bolts are accessible by lifting the seat and unscrewing the screws located at the rear of the under-seat compartment. Once these are loosened, you can also loosen the ones at the bottom of the rear mudguard. By removing these screws, you can completely slide out the number plate holder from its housing, position the new one, and secure it properly with the internal and external screws.
Updated on 27 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Bn 302
To replace the exhaust on a Benelli BN 302, loosen the bolts securing the side panels at the lower side of the bike to access the mounting ring betwe…
Bn 302
Today, remove the Torx screws located under the instrument panel to detach the headlamp. Next, unscrew the screws from the bulb cover to access the b…
Bn 302
This guide explains how to carry out the routine maintenance oil change on the Benelli BN 302 motorcycle. First, place your motorcycle on a stand and…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
