Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to change the engine oil in the Benelli TNT 135, an extremely simple and quick operation. First, ensure that the engine is sufficiently cool, then position a container beneath the bike, locate the drain hole bolt, and unscrew it using a 13mm socket. Allow all the oil in the system to drain out, remove the secondary filter, and clean it of any dirt residue. At this point, simply open the filter cap with an 8mm socket, insert the replacement, reassemble everything, and add the required amount of oil through the designated hole.

Posted on 1 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing Engine Oil and Oil Filter on a Benelli TNT 135
Changing Engine Oil and Oil Filter on a Benelli TNT 135
Tnt 135 In this tutorial, you will learn how to change the engine oil and oil filter on a Benelli TNT 135 motorcycle by following these simple steps. First, …
How to Change the Engine Oil on a Benelli TnT 135?
How to Change the Engine Oil on a Benelli TnT 135?
Tnt 135 To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the cor…
How to Change the Engine Oil on a Benelli TnT 135
How to Change the Engine Oil on a Benelli TnT 135
Tnt 135 To change the engine oil on a Benelli TnT 135, unscrew the plug located at the bottom of the casing on the right side of the bike, just below the cor…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos