Do it yourself
Frequently asked questions about cars and motorcycles

Model: Benelli 302r
Part: Engine oil

In this tutorial, learn how to change the engine oil in a Benelli 302R, a very simple and quick operation. First, ensure the engine is cool enough to work safely, then remove the relevant lower cover, locate the drain hole bolt, and unscrew it using an 18mm spanner. Allow all the oil in the system to drain out, unscrew the old filter, and tighten the replacement. At this point, reassemble everything and add the necessary amount of oil to reach the maximum level.

Posted on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

302r To change the engine oil of your Benelli 302R, place the motorcycle on a flat and cold surface. Lift the motorcycle, remove the oil drain plug and le…
302r To change the engine oil on the Benelli 302R, you need to unscrew the oil drain plug located at the bottom of the bike, in the central area. Place a …
302r In order to replace the battery of the Benelli 302R, you need to loosen the screws that secure the seat of the motorcycle to its housing: once these …

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos