Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Centre Brake Light on Benelli TNT 600

Model: Benelli Tnt 600
Part: License plate light

Video tutorial

Replacing the brake light located above the number plate is extremely simple on this motorcycle model. You only need to unscrew the small cross-head screw located under the light, which will lower it out of its housing.

Remove the connector from the housing, and the small bulb will come out with it. Remove the bulb from the connector and insert the new one. Reassemble the light by inserting the bulb connector and screw it back in place, ensuring it remains secure during riding.

As you can see, this is a task you can do yourself that requires very little time and money.


Updated on 6 April 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Benelli TNT 600?
How to Replace the Battery of the Benelli TNT 600?
Tnt 600 To replace the battery of the Benelli TNT 600, loosen the screws securing the seat on the right and left side, then remove it from its housing. Once …
How to Replace the Battery in a Benelli TNT 600
How to Replace the Battery in a Benelli TNT 600
Tnt 600 To replace the battery in the Benelli TNT 600, loosen the screws securing the seat on the left and right sides, then remove it from its position. Onc…
Replacement of the fuel pump filter for the Benelli TNT 600
Replacement of the fuel pump filter for the Benelli TNT 600
Tnt 600 Today we will see the instructions necessary to disassemble and replace the fuel pump filter of the Benelli TNT 600 motorcycle. First, we place the m…

How to Replace the Variator of the Honda PCX 125

This guide outlines the steps to remove and replace the variator of the Honda PCX 125 scooter. First, place the scooter on its centre stand and begin by removing the clutch cover by unscrewing the fastening screws. Next, unscrew the central nut of the fan and the one on the clutch bell, then remove the belt and the variator, as shown in the video. Now, install the new variator with the new rollers, reassemble the belt and the entire transmission, and finally refit the cover!

Watch the video!


by ScegliAuto

More videos