Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Today we will see the instructions necessary to disassemble and replace the fuel pump filter of the Benelli TNT 600 motorcycle. First, we place the motorcycle on the stand and begin to disassemble and remove the fuel tank by removing the rider's seat and unscrewing the tank screws; we disconnect the fuel line and the electrical connector. At this point, we unscrew the screws of the fuel pump located underneath, removing and replacing the fuel filter; we reinstall the pump and finally the tank, reconnecting all its connections.

Posted on 25 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Fuel Tank from the Benelli TNT 600
How to Remove the Fuel Tank from the Benelli TNT 600
Tnt 600 Below is the procedure to remove and replace the fuel tank on the Benelli TNT 600 motorcycle. First, place the bike on a stand and start by removing …
How to Replace the Air Filter on a Benelli TnT 600?
How to Replace the Air Filter on a Benelli TnT 600?
Tnt 600 To replace the air filter on a Benelli TnT 600, you need to loosen the screws that secure the vehicle's fuel tank so that it can be removed from its …
How to Replace the Spark Plugs on the Benelli TNT 600
How to Replace the Spark Plugs on the Benelli TNT 600
Tnt 600 Below are the instructions that will allow you to remove and replace the spark plugs on the Benelli TNT 600 engine. First, place the motorcycle on a …

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos