Do it yourself
Frequently asked questions about cars and motorcycles
To replace the motor oil of the Benelli TnT 600, you need to loosen the drain plug of the oil pan, which will be located in the central lower part of the motorcycle: once this plug has been unscrewed, it will be possible to drain all the used oil into a properly positioned container. You can now also remove the oil filter, located in the lower part of the vehicle; then you can perform the refill. The necessary amount of oil must be inserted through the vent located on the right side of the motorcycle.

Posted on 8 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Tnt 600 In this tutorial, you will learn how to change the engine oil in the Benelli TNT 600, a very simple and quick operation that should be performed ever…
Tnt 600 Below are the instructions that will allow you to remove and replace the spark plugs on the Benelli TNT 600 engine. First, place the motorcycle on a …
Tnt 600 This guide provides instructions on how to remove and replace the engine rev sensor on a Benelli TNT 600 motorcycle by following these simple steps. …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos