Do it yourself
Frequently asked questions about cars and motorcycles

Model: Benelli Tnt 600
Part:

Below is the procedure to remove and replace the fuel tank on the Benelli TNT 600 motorcycle. First, place the bike on a stand and start by removing the rider's seat; then unscrew the fastening screws found both at the top and bottom of the tank, as shown in the video. Next, lift the tank and disconnect the fuel line and the electrical connector for the float; then remove and replace the tank with a new one, applying the reverse procedure!

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Tnt 600 Today we will see the instructions necessary to disassemble and replace the fuel pump filter of the Benelli TNT 600 motorcycle. First, we place the m…
Tnt 600 Below are the instructions that will allow you to remove and replace the spark plugs on the Benelli TNT 600 engine. First, place the motorcycle on a …
Tnt 600 Follow these instructions to remove and replace the handlebars on your Benelli TNT 600 motorcycle. First, place the bike on a stand and start by remo…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos