Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Fuel Filter on a Benelli BN 125

Model: Benelli Bn 125
Part: Fuel filter

Video tutorial

In this video, you will see the steps to remove and replace the fuel filter on a Benelli BN 125 motorcycle. First, remove the passenger seat, then take off the rider's seat; next, unscrew the screws from the plastic fairings on the sides, as well as the screws from the fuel tank.

Now, lift the tank and disconnect the fuel filter from the inlet and outlet pipes; simply replace it with the correct new one, following the reverse procedure of disassembly!


Updated on 16 April 2026 by ScegliAuto


Related tutorials

How do you replace the air filter of the Benelli BN 125?
How do you replace the air filter of the Benelli BN 125?
Bn 125 In order to replace the air filter of the Benelli BN 125, you need to loosen the screws that secure the motorcycle seat to its base: the seat can now…
Replacing the Air Filter on a Benelli BN 125
Replacing the Air Filter on a Benelli BN 125
Bn 125 Today, you will learn how to remove and replace the air filter on a Benelli BN 125 in simple steps. First, remove the rider's seat by unscrewing the …
How to replace the engine oil and oil filter of the Benelli BN 125
Bn 125 These quick steps will show us the process of how to perform the routine maintenance service, replacing the motor oil and oil filter, of the Benelli …

How to Change the Engine Oil of a Royal Enfield Classic 350?

To change the engine oil of a Royal Enfield Classic 350, start by placing the bike on a stable surface, ideally using a centre stand to keep it balanced. Ensure the engine is warm, as the oil drains more easily when not cold. Locate the drain plug under the engine casing and position a container underneath to collect the used oil. Using the appropriate spanner, unscrew the plug and allow the oil to drain completely. Once drained, clean the plug and check that the seal is in good condition. Refit the plug carefully, avoiding over-tightening. Then proceed to fill the oil tank with the type and quantity specified by the manufacturer, using a funnel to avoid spills. Check the level with the dipstick or indicator on the engine, adding oil if necessary until the ideal quantity is reached. Start the engine for a few minutes, turn it off, and recheck the level, adjusting if needed.

Watch the video!


by ScegliAuto

More videos