Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Benelli Trk 251
Part: Clock

To set the clock on the Benelli TRK 502, turn the ignition key to switch on the instrument panel. Next, press the button located at the base of the right control knob, just below the rear-view mirror. This will cause the hours to start flashing: you can change them by pressing the same button and confirm by holding it down. You can perform the same operation to change the minutes; once the hour is set correctly, turn the key to switch off the instrument panel.

Updated on 10 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Install the Luggage Box on a Benelli TRK 251
How to Install the Luggage Box on a Benelli TRK 251
Trk 251 To mount the luggage box on the Benelli TRK 251, you need to attach the plastic support to the metal brackets located at the rear of the bike. You ma…
How do you replace the rear brake pads of the Benelli TRK 251?
How do you replace the rear brake pads of the Benelli TRK 251?
Trk 251 The replacement of the rear brake pads of the Benelli TRK 251 is done by loosening the screws that secure the brake caliper to its housing, so that i…
How to change the motor oil in the Benelli TRK 251?
How to change the motor oil in the Benelli TRK 251?
Trk 251 In this tutorial we can see how to replace the engine oil in the Benelli TRK 251, an extremely simple and quick operation. First of all, make sure th…

Replacing the Rear Light on a Harley Davidson Street Glide

In today's tutorial video, we will see how to remove and replace the rear light on a Harley Davidson Street Glide in simple and quick steps. First, place your bike on a stand and move to the rear; then use a socket and spanner to unscrew and remove the nuts found inside the wheel arch, at the height of the rear light, as shown in the video. At this point, disconnect the electrical connector to remove and replace the light with the new one; then reassemble everything, applying the reverse procedure!

Watch the video!


by ScegliAuto

More videos