|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 600i
In this guide, follow the steps to remove and replace the headlight bulb on the Benelli TNT 600i motorcycle. First, place your bike on a stand and start unscrewing the fixing screws located at the rear of the headlamp; then remove the bulb protection cover by disconnecting the electrical connector to take out the dipped or main beam bulb, as shown in the video. At this point, install the new bulb of the correct type and with the same fitting, then reassemble the optical unit!
Updated on 5 July 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 600i
In this tutorial, we can see how to replace the headlight bulbs on the Benelli TNT 600i, an extremely simple and quick operation. First of all, let's…
Tnt 600i
To replace the battery on a Benelli TNT 600i, start by removing the rear part of the seat so that its front pin can be released, allowing the front p…
Tnt 600i
Today, we will learn how to drain and replace the coolant on the Benelli TNT 600i motorcycle. First, place your motorcycle on a stand and start by un…
|
How to Change the Speed Unit on the Piaggio Mp3
If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.328
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
