Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Tnt 135
    4. : How to remove the engine failure warning light in Benelli TNT 135?

Model: Benelli Tnt 135
Part: Checks and maintenance
How to remove the engine failure warning light in Benelli TNT 135?

In this tutorial we can see how to remove the engine failure warning light in the Benelli TNT 125, a very simple and fast operation, to be carried out only after solving the problem that caused it to turn on. First of all insert the key, then turn on the instrument panel, wait for it to be completely initialised and then turn it off. Then wait at least 10 seconds, turn on the ignition 5 consecutive times, wait a further 15 seconds and finally start the engine. If the procedure has been carried out correctly, the failure warning light will have been successfully removed.


Posted on 25 May 2023 by ScegliAuto

How to replace and install the engine control unit of the Malaguti Spectre 125

Today's steps will show us how to replace or install the engine control unit of the Malaguti Spectre 125, following the instructions below. First, we put the side stand and start by removing the plastic partition found on the left side, unscrewing the screw; we will find the control unit at the back, which we will disconnect to remove, as shown in the video. At this point, if necessary, we replace the control unit and install the new one, making the electrical connection; then we start the engine and check its correct operation.

Watch the video!


by ScegliAuto

More videos