|
Do it yourself
| |||
| ||||
|
Model: Benelli Tnt 600i
To change the engine oil on a Benelli TnT 600i, unscrew the drain plug located at the central lower part of the vehicle: by loosening the plug, you can let all the used oil flow into a suitably placed container. In front of the drain plug, you will find the oil filter, which can be removed from its housing and replaced with a new spare part. After replacing the filter, close the drain plug and top up through the breather located on the right side of the bike.
Updated on 21 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Tnt 600i
Today, we will learn how to drain and replace the coolant on the Benelli TNT 600i motorcycle. First, place your motorcycle on a stand and start by un…
Tnt 600i
To disassemble the engine of the Benelli TnT 600i, you need to loosen the screws that secure the block to its housing, in the center of the frame: yo…
Tnt 600i
In this guide, follow the steps to remove and replace the headlight bulb on the Benelli TNT 600i motorcycle. First, place your bike on a stand and st…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |