Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Air Filter on the Benelli RFS 150i

Model: Benelli Rfs 150
Part: Air filter

This video is currently unavailable

To replace the air filter on the Benelli RFS 150i, open the under-seat compartment so that the seat can be positioned vertically. Once lifted, loosen the screws securing it to its housing and remove the seat.

At the front of the under-seat compartment, locate the air filter box, which will be opened to slide the filter out from its housing. This will allow you to insert the new replacement part and then refit the panel.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

Rfs 150 To replace the air filter on the Benelli RFS 150i, open the under-seat compartment so that the seat can be positioned vertically. Once done, loosen t…
Rfs 150 To replace the air filter on the Benelli RFS 150i, open the under-seat compartment so that the seat can be positioned vertically. Once done, loosen t…
Rfs 150 To change the engine oil on a Benelli RFS 150i, loosen the drain plug of the oil tank located at the central lower part of the bike: once the plug is…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos