Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the fork of the Beta Xtrainer?

Model: Beta Xtrainer
Part:

Video tutorial

In order to replace the fork of the Beta Xtrainer, you need to loosen the screws that secure the front wheel to its housing, disconnecting the corresponding brake caliper and removing the central pin of the wheel: this can be removed and then proceed by loosening the screws that secure the fork from the top. In this way, the old fork can be completely removed from its seat, inserting the new one: the latter can now be fixed to its seat, reinserting the wheel and verifying that everything works correctly.


Posted on 25 December 2024 by ScegliAuto


Related tutorials

Xtrainer To replace the fork on the Beta Xtrainer, loosen the bolts that secure the front wheel to its housing: the bolts are located on either side of the lo…
Xtrainer On the Beta Xtrainer, the front fork can be replaced by loosening the screws that secure the front wheel to its housing, disconnecting the correspond…
Xtrainer The fork that is installed on the Beta Xtrainer can be replaced by loosening the screws that fix the front wheel to its housing: the screws will be p…

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos