Do it yourself
Frequently asked questions about cars and motorcycles

How do you replace the engine oil of the Beta RR 300?

Model: Beta Rr 300
Part: Engine oil

Video tutorial

To perform the oil change on the Beta RR 300, you will need to loosen the drain plug of the oil pan located in the central lower part of the motorcycle: once the plug has been completely removed, you can let the old oil flow into a properly positioned container.

After all the oil has drained out, you can proceed by also removing the filter located in the same position: at this point, you will need to top up the oil. You can add the necessary amount of oil through the vent located on the right side of the motorcycle.


Posted on 8 April 2025 by ScegliAuto


Related tutorials

Rr 300 To replace the engine oil in the Beta RR 300, loosen the drain plug located at the central lower part of the bike: once it is removed, you can collec…
Rr 300 To perform the oil change on the Beta RR 300, you need to loosen the drain plug located in the lower center of the vehicle: by loosening this plug, i…
Rr 300 The motor oil on the Beta RR 300 can be replaced by loosening the drain plug located in the bottom of the oil pan located in the central bottom part …

How to Reset the Service Light on a Vespa Sprint 150?

To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key.

Watch the video!


by ScegliAuto

More videos