Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 300
Part: Engine oil

The motor oil on the Beta RR 300 can be replaced by loosening the drain plug located in the bottom of the oil pan located in the central bottom part of the vehicle: once the plug is completely unscrewed, it will be possible to drain the used oil into a properly positioned container. Once the oil has completely drained, you can proceed by also removing the filter located in the same position: at this point, you will need to top up the oil. You can add the necessary amount of oil through the vent located on the right side of the vehicle.

Posted on 11 August 2025 by ScegliAuto

Video tutorial

Related tutorials

Rr 300 To replace the engine oil in the Beta RR 300, loosen the drain plug located at the central lower part of the bike: once it is removed, you can collec…
Rr 300 In this tutorial, you will learn how to dismantle the fork and change the oil and seals on the Beta RR 300 enduro bike. First, remove the fork from t…
Rr 300 In today's tutorial, you will learn how to perform routine maintenance for an oil change on a Beta RR 300 2T in simple steps. First, obtain the new e…

Replacing the Rear Headlamp Bulb on the Aprilia Shiver 900

Follow these instructions to remove and replace the rear headlamp bulb on the Aprilia Shiver 900 motorcycle. First, place your motorcycle on a stand and remove the seat. Next, unscrew the screws from the plastic cover of the wiring harness, disconnecting the bulb connector to remove it from the bulb holder, as shown in the video. At this point, install the new stop bulb of the correct type and with the same fitting, reconnecting it and refitting the components that were previously removed.

Watch the video!


by ScegliAuto

More videos