Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 300
Part: Engine oil

In today's tutorial, you will learn how to perform routine maintenance for an oil change on a Beta RR 300 2T in simple steps. First, obtain the new engine oil and drain the old oil by unscrewing the drain bolt with a socket spanner (after removing the crash bar); then clean the magnet of any metallic debris and screw the bolt back in. At this point, open the upper filler cap and pour in the new engine oil with the correct specifications; fill to the maximum level as shown in the video!

Updated on 3 April 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

How to Change the Transmission Oil on the Beta RR 300
How to Change the Transmission Oil on the Beta RR 300
Rr 300 Below is the procedure for performing the routine maintenance service, changing the transmission oil on the Beta RR 300. First, place the bike on its…
How to Replace the Engine Oil in a Beta RR 300?
How to Replace the Engine Oil in a Beta RR 300?
Rr 300 To replace the engine oil in the Beta RR 300, loosen the drain plug located at the central lower part of the bike: once it is removed, you can collec…
How to change the transmission oil on a Beta RR 300
How to change the transmission oil on a Beta RR 300
Rr 300 Today, we will provide the main instructions for performing the routine maintenance service by changing the transmission oil and oil filter on the Be…

How to Replace the Air Filter on a Honda XL1000 Varadero?

In this tutorial, you will see how to replace the air filter on a Honda XL1000 Varadero, a very simple operation. First, remove the seat, then unscrew the two rear mounting bolts of the tank, the two front ones, and the remaining ones located on the sides. Once done, close the two fuel taps, disconnect the rubber hose, and lift the tank. At this point, you will have access to the filter box, which can be opened by removing the 8 screws around the perimeter. Once the filter is replaced, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos