Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the panels of the Peugeot Kisbee

Model: Peugeot Kisbee
Part:

Video tutorial

In this short and simple guide, you will see how to remove the plastic panels of the Peugeot Kisbee scooter, following the instructions provided below. First, place your scooter on the centre stand and begin by lifting the rider's seat; then, unscrew the fixing screws found in the under-seat compartment and under the footboard, subsequently removing the panels as shown in the video.

At this point, unscrew the screws of the footboard to remove it, then remove the front shield (disconnecting the electrical connectors as well); finally, reassemble everything by applying the reverse procedure!


Updated on 4 August 2026 by ScegliAuto


Related tutorials

How to Replace the Fairings on the Peugeot Kisbee
How to Replace the Fairings on the Peugeot Kisbee
Kisbee In this video tutorial, follow the main instructions to remove and replace the fairings on the Peugeot Kisbee scooter. First, place the scooter on th…
How to Replace the Piston in a Peugeot Kisbee?
How to Replace the Piston in a Peugeot Kisbee?
Kisbee To replace the piston on the Peugeot Kisbee, completely remove the engine from its housing by taking off the side and front protective panels and fre…
How to Remove the Variator Cover from a Peugeot Kisbee
How to Remove the Variator Cover from a Peugeot Kisbee
Kisbee Before starting, dismount from your Peugeot Kisbee, position it on its central stand, and if possible, lift it. The variator cover is secured in plac…

How to Replace the USB Socket on the Benelli TRK 502?

To replace the USB socket on the Benelli TRK 502, loosen the screws securing the left side panel of the motorcycle, located just below the handlebars: once this panel is freed, you can remove it and locate the USB socket connector. By disconnecting this connector, you can pull the socket out of its housing: then connect the new socket to the connector, inserting it into its housing. After installation, check that the socket works by reinstalling the panel.

Watch the video!


by ScegliAuto

More videos