Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below is the procedure for performing the routine maintenance service, changing the transmission oil on the Beta RR 300. First, place the bike on its stand and begin unscrewing the drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; clean the drain plug of any metal debris, as shown in the video. At this point, unscrew the filler cap and top up with the correct new engine oil; refill to the appropriate quantity indicated in the owner's manual.

Posted on 27 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the transmission oil of the Beta RR 300
How to replace the transmission oil of the Beta RR 300
Rr 300 Today we will discover the instructions that will allow us to replace the transmission oil of the Beta RR 300 enduro motorcycle. First of all, we pro…
How to Change the Gear Oil on a Beta RR 300
How to Change the Gear Oil on a Beta RR 300
Rr 300 Today, let’s discover how to perform routine maintenance by changing the transmission oil on the Beta RR 300 enduro bike. First, place your bike on a…
How to change the transmission oil on a Beta RR 300
How to change the transmission oil on a Beta RR 300
Rr 300 Today, we will provide the main instructions for performing the routine maintenance service by changing the transmission oil and oil filter on the Be…

Where is the Battery on the Piaggio Medley 125 Scooter and How to Remove It?

In this video, see where the battery is located on the Piaggio Medley 125 scooter and how to remove it, a very simple and quick operation. As shown, it is located behind the front storage compartment, positioned under the handlebars. To access it, first open the compartment, then remove the right cover by unscrewing the relevant screws with a cross-head screwdriver. Once done, unscrew the additional screws of the battery cover with a Torx T25 key, extract it, and disconnect both terminals with the same screwdriver. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos