Do it yourself
Frequently asked questions about cars and motorcycles
Is it time to change the transmission oil in your Beta? You're in the right place. It's great to perform maintenance on your bike yourself; in this guide, I will explain step by step how to do it correctly. Place a container under the bike to collect the old oil. Unscrew the bolt closest to the rear wheel. Be careful as the oil will flow out quickly once it's free; be prepared. Keep the bike upright to allow all the used oil to drain. Re-screw the bolt; the new lubricant goes into the reservoir on the right side of the bike. You can check the level through the designated transparent window.

Updated on 7 March 2026 by ScegliAuto

Video tutorial

Related tutorials

390 Rrs Today, we will see how to remove the fuel tank from a Beta 390 RRS. First, remove the seat and then unscrew the side screws of the tank; next, take o…
390 Rrs To replace the exhaust on the Beta 390 RRS, you need to loosen the screws that secure it to its housing on the right side of the bike, near the rear …
390 Rrs The replacement of the muffler of the Beta 390 RRS can be done by loosening the screws that fix it to the housing on the right side of the motorcycle…

How to Remove the Side Plastic Panels of a BMW R1200 RT

In this brief guide, you will find instructions for removing the side plastic panels or fairings of the BMW R1200 RT motorcycle. First, place the bike on a stand and begin by removing the passenger and rider seats. Unscrew the screws on the top and bottom of the tank, then unscrew the side screws of the panels as shown in the video. At this point, remove and repair (or replace) the panels, securing them properly to the bodywork. Finally, reassemble all previously removed components.

Watch the video!


by ScegliAuto

More videos