Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a BMW F 650 GS?

Model: Bmw F 650 Gs
Part: Engine oil

Video tutorial

Changing the engine oil of a BMW F 650 GS requires attention and some fundamental steps. First, ensure that the engine is warm, as this will make the oil more fluid and allow it to drain easily.

Position the bike on a stable centre or side stand and locate the drain plug situated at the bottom of the engine. After placing an appropriate container under the plug, unscrew it carefully, allowing the used oil to drain completely.

Once the draining is complete, reinsert the plug, ensuring it is tightly secured. Then proceed to fill the reservoir with new oil, adhering to the quantity and specification recommended by the manufacturer.

Check the level using the dipstick or indicator system, ensuring it is correct. Finally, start the engine for a few minutes, turn it off, and check the level again to ensure it is adequate after circulation.


Updated on 5 November 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a BMW F 650 GS?
How to Change the Engine Oil on a BMW F 650 GS?
F 650 Gs To change the engine oil on a BMW F 650 GS, you need to unscrew the oil drain plug located at the bottom of the bike, towards the front. Once the plu…
How to Replace the Battery in the BMW F 650 GS?
How to Replace the Battery in the BMW F 650 GS?
F 650 Gs To replace the battery in the BMW F 650 GS, open the compartment at the rear of the bike so that the screws securing the seat can be removed. Once th…
How do you replace the front brake pads of the BMW F 650 GS?
How do you replace the front brake pads of the BMW F 650 GS?
F 650 Gs In order to replace the front brake pads of the BMW F 650 GS, you need to loosen the brake caliper so that it can be released from its housing above …

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos