|
Do it yourself
| |||
| ||||
How to Change the Engine Oil in a Suzuki DR 650
Model: Suzuki Dr 650
Video tutorial
This tutorial shows how to change the engine oil in a Suzuki DR 650, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then position a container underneath the bike, locate the drain bolt, and unscrew it using a 17mm socket. Allow all the oil in the system to drain out, open the filter cap, insert the replacement, and reassemble everything. Finally, pour in the required amount of oil through the designated top hole.
Updated on 5 November 2026 by ScegliAuto
Related tutorials
Dr 650
Before starting, sit on the seat of your Suzuki DR 650. Begin by inserting the key into the ignition switch and turn it fully clockwise. Next, pull t…
Dr 650
To dismantle the engine of a Suzuki DR 650, you need to loosen the bolts securing the cylinder head so that it can be removed along with the valve co…
Dr 650
To replace the clutch on a Suzuki DR 650, you need to loosen the bolts securing the cover on the left side of the bike, which can then be removed to …
|
How to Replace the Water Pump on a Gilera DNA 50
To replace the water pump on a Gilera DNA 50, you must completely disassemble the transmission cover along with the related components inside. On the left side of the cover, near the variator, you will find the water pump under its cover. By removing the screws that secure it from the inside, the old water pump can be taken out of its housing. After removal, insert the new spare part, reassemble the transmission, and all previously removed components. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
