|
Do it yourself
| |||
| ||||
Model: Suzuki Dr 650
Before starting, sit on the seat of your Suzuki DR 650. Begin by inserting the key into the ignition switch and turn it fully clockwise. Next, pull the starter lever located on the right side of the engine block, then press it firmly with your foot. If the engine does not start on the first attempt, repeatedly press the starter lever until the engine starts. Once the engine is running, you can close the starter lever, and you will have completed the procedure.
Updated on 22 April 2026 by ScegliAuto
Video tutorial
Related tutorials
Dr 650
In this tutorial we can see how to replace the motor oil in the Suzuki DR 650, an extremely simple and quick operation. First of all, we wait for the…
Dr 650
To replace the clutch on a Suzuki DR 650, you need to loosen the bolts securing the cover on the left side of the bike, which can then be removed to …
Dr 650
In order to replace the front brake pads of the Suzuki DR 650, you will need to loosen the screws that secure the brake caliper corresponding to the …
|
How to Service the Piaggio Vespa GTS 300
This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |