Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Suzuki Dr 650 - Video guides

Suzuki Dr 650
How do you replace the front brake pads of the Suzuki DR 650?
In order to replace the front brake pads of the Suzuki DR 650, you will need to loosen the screws that secure the brake caliper corresponding to the …Read all…
Posted on 15 March 2025 by ScegliAuto
Suzuki Dr 650
How do you disassemble the engine of the Suzuki DR 650?
In order to disassemble the engine of the Suzuki DR 650, you need to loosen the screws that fix the cylinder head so that it can be removed along with the …Read all…
Posted on 19 November 2024 by ScegliAuto
Suzuki Dr 650
How to change the motor oil in the Suzuki DR 650?
In this tutorial we can see how to replace the motor oil in the Suzuki DR 650, an extremely simple and quick operation. First of all, we wait for the engine to …Read all…
Posted on 18 November 2024 by ScegliAuto
Suzuki Dr 650
How to Replace the Clutch on a Suzuki DR 650?
To replace the clutch on a Suzuki DR 650, you need to loosen the bolts securing the cover on the left side of the bike, which can then be removed to access the …Read all…
Posted on 15 September 2026 by ScegliAuto
Suzuki Dr 650
How to Start a Suzuki DR 650
Before starting, sit on the seat of your Suzuki DR 650. Begin by inserting the key into the ignition switch and turn it fully clockwise. Next, pull the starter …Read all…
Posted on 3 June 2026 by ScegliAuto
Suzuki Dr 650
Replacing Front Brake Pads on a Suzuki DR650
To start, locate the flat screw at the bottom of the caliper and unscrew it with a screwdriver. Then unscrew the 5 mm Allen screw and the two bolts that …Read all…
Posted on 17 May 2026 by ScegliAuto

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos