Do it yourself
Frequently asked questions about cars and motorcycles

Model: Suzuki Dr 650
Part: Engine

In order to disassemble the engine of the Suzuki DR 650, you need to loosen the screws that fix the cylinder head so that it can be removed along with the valve cover. Once these parts have been removed, you will need to loosen the cylinder screws and remove it, accessing the piston. This piece must be removed from its connecting rod in order to access the crankshaft, and the necessary components can be replaced with new ones. This way, you can reassemble the engine to ensure that everything is working properly.

Posted on 19 November 2024 by ScegliAuto

Video tutorial

Related tutorials

Dr 650 Before starting, sit on the seat of your Suzuki DR 650. Begin by inserting the key into the ignition switch and turn it fully clockwise. Next, pull t…
Dr 650 In this tutorial we can see how to replace the motor oil in the Suzuki DR 650, an extremely simple and quick operation. First of all, we wait for the…
Dr 650 To replace the clutch on a Suzuki DR 650, you need to loosen the bolts securing the cover on the left side of the bike, which can then be removed to …

How to Service the Piaggio Vespa GTS 300

This brief guide will illustrate the main steps to perform the routine maintenance service on the Piaggio Vespa GTS 300, replacing the engine oil and oil filter. First, place the scooter on the centre stand and start by unscrewing the oil drain bolt found under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge using the appropriate tool, and hand-tighten the new one. Finally, unscrew the filler cap and top up, filling to the maximum level mark!

Watch the video!


by ScegliAuto

More videos