Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Suzuki
  4. :
  5. Dr 650
  6. : Replacement front brake pads on Suzuki DR650

Model: Suzuki Dr 650
Part: Brake pads
Replacement front brake pads on Suzuki DR650

To begin, locate the flat screw in the lower part of the caliper and unscrew it with a screwdriver. Then unscrew the 5 mm Allen screw and the two bolts that need a socket wrench, as shown in the video. Once the caliper is removed, you can simply remove the tablets from the inside. Since you are at it, I recommend that you thoroughly clean the entire braking area. The new pads will obviously be much thicker than those removed, so widen the seat pistons in which they are to be inserted before fitting them. Reassemble the caliper and tighten the fixing screws and that's it.


Posted on 26 January 2024 by ScegliAuto

How do i replace the battery of the Royal Enfield Classic 350?

The replacement of the battery of the Royal Enfield Classic 350 is carried out by loosening the screws that secure the casing located on the left side of the bike, immediately under the fuel tank. Once this has been opened, it will be possible to access the underlying battery: the latter must be released from its housing by disconnecting the power cables and unscrewing the fixing screws. After the old battery has then been removed from its housing, the new one can be inserted so that it can be connected and secured.

Watch the video!


by ScegliAuto

More videos