Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Dr 650
Part: Brake pads

In order to replace the front brake pads of the Suzuki DR 650, you will need to loosen the screws that secure the brake caliper corresponding to the appropriate disc. Once the caliper has been freed, you can proceed to detach it from the disc in order to remove the pin that holds the pads. The pads can now be removed from their housing in order to insert the new ones: these must be fixed inside the caliper with the appropriate pin. Then you can reattach the caliper to the disc to verify that everything is functioning correctly.

Posted on 15 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Brake Pads on a Suzuki DR650
Replacing Front Brake Pads on a Suzuki DR650
Dr 650 To start, locate the flat screw at the bottom of the caliper and unscrew it with a screwdriver. Then unscrew the 5 mm Allen screw and the two bolts t…
How to change the motor oil in the Suzuki DR 650?
How to change the motor oil in the Suzuki DR 650?
Dr 650 In this tutorial we can see how to replace the motor oil in the Suzuki DR 650, an extremely simple and quick operation. First of all, we wait for the…
How to Replace the Clutch on a Suzuki DR 650?
How to Replace the Clutch on a Suzuki DR 650?
Dr 650 To replace the clutch on a Suzuki DR 650, you need to loosen the bolts securing the cover on the left side of the bike, which can then be removed to …

How to Replace the Clutch on a Triumph Speed Triple?

To replace the clutch on a Triumph Speed Triple, loosen the bolts securing the covers of the three casings located on the right side of the bike, namely the starter motor, the engine, and then the clutch. Once these covers are removed, you can access the bolts securing the clutch, unscrew them, and slide the clutch plates out of their housing. This will allow you to insert the new plates into their place, securing everything with the appropriate bolts; finally, reinstall all the casings.

Watch the video!


by ScegliAuto

More videos