|
Do it yourself
| |||
| ||||
Removing the Fuel Tank on a Beta 400 RR
Model: Beta Rr 400
Video tutorial
Let’s see how to remove the fuel tank from a Beta RR 400 enduro bike, along with other components of the bike, by following these steps. First, remove the side plastic fairings by unscrewing the fastening screws with a screwdriver; then unscrew the fastening screws of the tank and disconnect the fuel hoses. At this point, unplug the electrical connector and lift the tank upwards to remove it, as illustrated in the video. Follow the video to the end for the removal of the frame plastics and the rear tail section.
Updated on 25 April 2026 by ScegliAuto
Related tutorials
Rr 400
To dismantle the engine of the Beta RR 400, loosen the bolts securing the engine block to its housing so that it can be completely extracted. Next, u…
Rr 400
To replace the exhaust of the Beta RR 400, loosen the screws that secure the panel at the rear of the bike, near the mudguard on the right side: when…
Rr 400
Dismantle the engine block of the Beta RR 400 by loosening the screws that secure it to its housing, allowing for complete removal. Next, unscrew the…
|
How to Change the Engine Oil on the Kymco Like 200?
To change the engine oil on the Kymco Like 200, loosen the drain plug located at the central lower part of the bike: once this plug is removed, you can let all the used oil flow into a suitably positioned container. When all the lubricant has drained out, close the drain plug and top up the oil: this can be done by pouring oil into the breather located on the right side of the engine casing, just above the exhaust. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |