|
Do it yourself
| |||
| ||||
How to Replace the Coolant and Radiator on the Beta RR 250
Model: Beta Rr 250
Video tutorial
In today's tutorial, you will learn how to bleed the coolant and replace the radiator on the Beta RR 250 and RR 300 enduro bike. First, drain the coolant by loosening the bleed screw with a socket spanner; let the fluid drain into a container. Next, unscrew the radiator hose clamps to disconnect them, then remove the radiator by unscrewing its bolts. Replace it with the new one (in this case, a new cooling kit is being installed), following the video until the end!
Updated on 13 May 2026 by ScegliAuto
Related tutorials
Rr 250
To replace the clutch on the Beta RR 250, you need to loosen the screws securing the cover on the right side of the bike, near the footpeg. Once thes…
Rr 250
Today, we will go through the step-by-step procedure for performing routine maintenance by changing the transmission oil on the Beta RR 250 enduro bi…
Rr 250
To replace the engine cylinder on a Beta RR 250, unscrew the bolts securing the seat to the top of the bike. Once removed, access the components at t…
|
How to Change the Engine Oil on the Kymco Like 200?
To change the engine oil on the Kymco Like 200, loosen the drain plug located at the central lower part of the bike: once this plug is removed, you can let all the used oil flow into a suitably positioned container. When all the lubricant has drained out, close the drain plug and top up the oil: this can be done by pouring oil into the breather located on the right side of the engine casing, just above the exhaust. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
