Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Oil in a BETA RR 250?

Model: Beta Rr 250
Part: Engine oil

Video tutorial

As seen in this tutorial, changing the oil in a Beta RR 250 is an extremely simple and quick task. Before proceeding, ensure the engine is completely cold for safety.

Start by placing a container underneath the bike, then unscrew the bolt indicated with a 13mm socket and let all the oil in the system drain out. Unscrew the cap from the upper hole to facilitate drainage, clean the filter of any residue, and reinsert it. Finally, pour the necessary amount of oil through the upper hole.


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Replace the Oil Tank for the Fuel Mixture on the Beta RR 250
How to Replace the Oil Tank for the Fuel Mixture on the Beta RR 250
Rr 250 In this brief guide, you will find instructions to replace the oil tank for the fuel mixture on the Beta RR 250 enduro bike. First, place the bike on…
Guide to Changing the Transmission Oil on a Beta RR 250
Guide to Changing the Transmission Oil on a Beta RR 250
Rr 250 Today, we will go through the step-by-step procedure for performing routine maintenance by changing the transmission oil on the Beta RR 250 enduro bi…
Replacing the Shock Absorber Spring on Beta RR 250
Replacing the Shock Absorber Spring on Beta RR 250
Rr 250 In this video, see how to remove and replace the suspension spring on a Beta RR 250 enduro bike by following these simple steps. First, unscrew the l…

How to Change the Engine Oil of a Royal Enfield Classic 350?

To change the engine oil of a Royal Enfield Classic 350, start by placing the bike on a stable surface, ideally using a centre stand to keep it balanced. Ensure the engine is warm, as the oil drains more easily when not cold. Locate the drain plug under the engine casing and position a container underneath to collect the used oil. Using the appropriate spanner, unscrew the plug and allow the oil to drain completely. Once drained, clean the plug and check that the seal is in good condition. Refit the plug carefully, avoiding over-tightening. Then proceed to fill the oil tank with the type and quantity specified by the manufacturer, using a funnel to avoid spills. Check the level with the dipstick or indicator on the engine, adding oil if necessary until the ideal quantity is reached. Start the engine for a few minutes, turn it off, and recheck the level, adjusting if needed.

Watch the video!


by ScegliAuto

More videos