Do it yourself
Frequently asked questions about cars and motorcycles

Model: Beta Rr 125
Part: Shocks

To replace the front shock absorber springs on the Beta RR 125, you must completely remove the front fork of the motorcycle: to do this, remove the retaining rings that secure it at the top and remove the bolts and axle that secure the front wheel. Once the fork is removed, you can loosen the nut located at the top, then slide the spring out from inside the shock absorber. Now you can insert the new spring and reassemble the fork and corresponding shock absorbers back into their housing.

Updated on 2 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Rr 125 In this guide, we will see the instructions that will allow us to replace the jets of the carburetor on the Beta RR 125. First, let's remove the carb…
Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
Rr 125 In this guide, you will find instructions to perform a full service on the Beta RR 125 enduro bike. First, drain the engine oil by unscrewing the bol…

How to Replace the Front Headlight Bulb on a BMW R1150 R?

This tutorial shows how to replace the front headlight bulb on a BMW R1150 R, a very simple and quick task. First, ensure the key is not inserted for safety. Then locate the screw at the bottom edge of the headlight and remove it. Next, separate the headlight from the base, disconnect the power connector, and extract the old bulb by releasing the metal clip. Finally, insert the new bulb without touching the glass with bare hands, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos