Do it yourself
Frequently asked questions about cars and motorcycles
This guide provides instructions on how to dismantle and replace the front headlamp bulb on the Beta RR 125 enduro bike, as well as the RR 300. First, place your bike on a stand and begin by removing the front headlamp; to do this, unscrew the side fixing screws and disconnect the electrical connector of the bulb. At this point, remove and replace the bulb with a new one of the correct type and with the same fitting; insert it properly into the lamp holder and reassemble the headlamp unit, applying the reverse procedure!

Updated on 18 July 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Rr 125 Begin by sitting on the rider's seat of your Beta RR 125. Next, insert the key into the ignition switch and turn it to activate the instrument panel.…
Rr 125 In order to replace the air filter of the Beta RR 125, you will need to pull the lever that allows you to secure the seat of the motorcycle to its ho…
Rr 125 To replace the clutch of the Beta RR 125, you need to loosen the screws that secure the cover located on the right side of the bike, corresponding to…

How to Perform Routine Maintenance on the Benelli 502C

In this short and simple guide, you will learn how to perform routine maintenance on the Benelli 502C motorcycle. First, place the motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then replace both the engine oil and the oil filter. Next, check the correct tension of the drive chain by adjusting it at the wheel nut; finally, check the brake fluid and coolant levels, and inspect the brake wear!

Watch the video!


by ScegliAuto

More videos