|
Do it yourself
| |||
| ||||
How to Replace the Pinion Seal on the Beta Xtrainer?
Model: Beta Xtrainer
Video tutorial
To replace the pinion seal on the Beta Xtrainer, loosen the central nut that secures the pinion to its housing, allowing it to be removed from the corresponding end of the shaft: you will also need to remove the chain from the pinion itself to access the underlying seal. This can be extracted from its seat using a tool, allowing you to insert the new replacement part; after replacement, reinsert the pinion, reposition the chain, and secure everything with the corresponding nut.
Updated on 29 July 2026 by ScegliAuto
Related tutorials
Xtrainer
In order to replace the counter shaft seal of the Beta Xtrainer, you need to loosen the nut that secures the sprocket, located on the left side of th…
Xtrainer
To replace the water pump gasket on the Beta Xtrainer, first open the coolant drain plug. Place a container under the drain plug to collect all the u…
Xtrainer
In order to install the clutch cylinder cover on the Beta Xtrainer, you need to loosen the screws that secure the cover located on the left side of t…
|
How to Reset the Service Light on a Vespa Sprint 150?
To reset the Service light on a Vespa Sprint 150, insert the ignition key into the corresponding lock. Once turned to activate the instrument panel, press and hold the button located on the right side of the handlebars. Wait a few seconds with the button pressed until the Service light disappears from the instrument panel. Once the light has been reset, release the button and turn off the ignition by turning the key. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.008
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
