Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Xtrainer
Part: Pump

To replace the water pump gasket on the Beta Xtrainer, first open the coolant drain plug. Place a container under the drain plug to collect all the used coolant. Once it has completely drained, loosen the bolts securing the water pump cover and detach the gasket from its inner side. The new gasket can then be fitted to the inner side of the cover; this should then be positioned on the pump and secured with the appropriate bolts.

Updated on 29 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Piston on a Beta Xtrainer 300?
Xtrainer To replace the piston on the Beta Xtrainer, first open the water pump cover and collect the coolant in a container. Now, accessing from the side of t…
How to Replace the Rear Shock Absorber on a Beta Xtrainer
How to Replace the Rear Shock Absorber on a Beta Xtrainer
Xtrainer You can replace the rear shock absorber on the Beta Xtrainer by loosening the bolts that secure it to its housing, located between the rear wheel arc…
How to Replace the Rear Shock Absorber on the Beta Xtrainer?
How to Replace the Rear Shock Absorber on the Beta Xtrainer?
Xtrainer You can replace the rear shock absorber on the Beta Xtrainer by loosening the bolts that secure the component to its housing at the rear of the vehic…

How to Replace the Fork Seal on a Malaguti XSM 125?

To replace the fork seal on a Malaguti XSM 125, loosen the bolts that secure the fork to its housing: these screws will be located at the top of the fork, just below the handlebars, and at the bottom near the wheel. Once all the bolts are loosened, you can free the wheel from its housing, allowing the fork to be detached as well: the seal at the top can be removed using a tool, so it can be replaced with a new one.

Watch the video!


by ScegliAuto

More videos