|
Do it yourself
| |||
| ||||
Video tutorial
To replace the fuel pump of the BMW K75, you need to open the fuel cap located on the top of the tank: once the cap is opened, you can locate the screws underneath that secure the cap from the top of the tank. Once these screws are loosened, you can remove the cap and locate the pump underneath it: the pump can be freed from the screws and hoses so that it can be extracted. After removing the old pump, you can insert the new one to check its operation.
Posted on 15 January 2025 by ScegliAuto
Related tutorials
K75
It will be possible to replace the battery of the BMW K75 by inserting the ignition key into the lock located at the bottom right of the saddle itsel…
K75
The air filter installed on the BMW K75 can be replaced by loosening the screws that secure the air filter box to its housing: this is located direct…
K75
In order to replace the spark plug of the BMW K75, you need to loosen the screws that secure the panel on the left side of the engine block. Once thi…
|
Replacing the Rear Brake Pads of the BMW G310 GS
Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end! by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
