Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Bmw
    3. : K1100

Model: Bmw K1100
Part: Brake pads

In order to replace the front brake pads of the BMW K1100, you need to loosen the screws that secure the brake caliper corresponding to the respective disc. After removing the caliper, it will be possible to proceed to remove the pin that locks the pads and lever them out. Once they have been removed, you can then place the new pads in the caliper, which must now be repositioned on the disc and secured with the screws. After installation, you will need to verify that everything works properly even after the replacement has taken place.

Posted on 29 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Fuel Filter on a BMW K1100
Replacing the Fuel Filter on a BMW K1100
K1100 This guide will provide instructions for removing and replacing the fuel filter in the tank of a BMW K1100 motorcycle. First, place the bike on its s…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos