Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K1600
Part: Brake pads

It will be possible to replace the front brake pads of the BMW K1600 by loosening the screws that secure the brake caliper corresponding to the specific disc: once the caliper is removed from the disc, it will be possible to proceed by removing the pin that locks the pads inside the caliper so that they can be removed from their housing. At this point, it will be possible to place the new pads inside the caliper by repositioning it on the disc: it will now be possible to verify that the caliper functions correctly even after the replacement.

Posted on 4 May 2025 by ScegliAuto

Video tutorial

Related tutorials

K1600 To replace the front brake pads on the BMW K1600, you need to loosen the screws that secure the brake caliper to the corresponding disc: once these s…
K1600 To replace the rear brake pads of the BMW K1600, loosen the bolts securing the rear wheel at the end of the swingarm: this will allow the wheel to be…
K1600 In order to replace the front wheel of the BMW K1600, you need to loosen the screws that secure the front brake caliper to the corresponding disc: on…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos