Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw K1600 Gt
Part: Engine oil

It will be possible to replace the engine oil of the BMW K1600 GT by loosening the drain plug located in the central lower part of the motorcycle: once the plug is removed, it will be possible to drain all the oil into a container properly positioned so that the filter, also located in the lower part of the motorcycle, can be removed. After removal, it will be possible to proceed with topping up: the necessary amount of oil must be inserted through the vent located on the right side of the motorcycle to ensure that everything is functioning properly.

Posted on 13 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on BMW K1600 GT?
How to Change the Engine Oil on BMW K1600 GT?
K1600 Gt To change the engine oil on the BMW K1600 GT, loosen the bolt securing the drain plug of the oil reservoir: this drain plug is located at the lower c…
How to Remove the Side Fairing of a BMW K1600 GT
How to Remove the Side Fairing of a BMW K1600 GT
K1600 Gt Before starting, position your BMW K1600 GT on its central stand. Begin by unscrewing and removing the screws that secure the fairing to the frame us…
How to Replace the Air Filter on the BMW K1600 GT?
How to Replace the Air Filter on the BMW K1600 GT?
K1600 Gt To replace the air filter on the BMW K1600 GT, loosen the screws securing the side fairings of the bike, located near the fuel tank. Once all screws …

How to Replace the Front Headlight on the BMW F800GS

In this tutorial, you will see how to replace the front headlight on the BMW F800GS, an extremely simple and quick operation. First, ensure the key is not inserted for safety, then locate the power connector at the back of the headlamp and disconnect it by pressing the clip. Next, unscrew the two side bolts using a Torx T40 key, grasp the headlight and pull it away from the support. At this point, you can insert the replacement, tighten the two bolts, and reconnect the power connector.

Watch the video!


by ScegliAuto

More videos